H OTS POT GATEWAY220 System AdministrationImporting the Factory Defaults {Factory}This procedure shows you how to replace the current configuration settings with thesettings that were established at the factory.1. From the Web Management Interface, click on System, then Factory.The Factory Configuration screen appears:2. Click on the Submit and Reboot button to replace the current systemconfiguration settings with the factory default settings and reboot the HSG.If you restore the factory default configuration settings, you will nolonger be able to access the HSG remotely. However, you always havethe option of using the “import” function to restore systemconfiguration settings from the archive file.The factory default configuration does not include the networksettings. The network connection will be lost if this “import” functionis performed. To avoid a prolonged service interruption, perform thisprocedure from the Command Line Interface via the serial port.You will need to reboot the system for some of the imported defaultsettings to take effect (especially DHCP).Click here to view the“current.txt” fileClick here to view the“factory.txt” file
