CallPilot and CS 1000 integration 19tower/rackmount server integrated with CS 1000Note: The above diagram shows a tower server. However, the sameconfiguration applies to a rackmount server.CS 1000 network setupIn the previous illustrations, the telephony LAN (TLAN) provides IPconnectivity between the CS 1000 system and the i2004 Internet phonesets.The connection between the Call Server and Media Gateway can bepoint-to-point, or it can be through the LAN, if the system is installed ina distributed data network.For information about the CS 1000 system and i2004 Internet phonesetbandwidth and network requirements, see the Communication Server1000S: Installation and ConfigurationFor a description of each CS 1000 system component, see "CS 1000 MediaGateway" (page 20).CallPilot componentsCallPilot serverThe CallPilot server connects to the CS 1000 system and, where desktopmessaging is enabled, to the Nortel Server Subnet (NS Subnet). If yourserver is a 201i server, it resides inside the CS 1000 system.MGate card (NTRB18CA) -- tower and rackmount servers onlyThe MGate card (NTRB18CA) is a line card that is installed inside the CS1000 system. The MGate card sends the voice and data signals to theMPB boards in the CallPilot server.Nortel CallPilotCommunication Server 1000 and CallPilot Server ConfigurationNN44200-312 01.02 Standard5.0 3 May 2007Copyright © 2007, Nortel Networks.
