Defining CallPilot in the customer data block 65Prompt Response DescriptionAODN CallPilotCDNAttendant Overflow DN. Set this promptto a CallPilot CDN to launch a CallPilotservice when the attendant overflows.The SDN Table in CallPilot must have thedesired AODN service defined for DN 0.The CS 1000 system issues an SCH1872error, but accepts the DN. This error is awarning that the DNmust be a CallPilot CDN.FNAL FDN Call forward no answer local calls (withCFCT enabled) are routed to flexibleCFNA DN.CFNA,CFN0,CFN1,CFN24 The number of ring cycles before the callis forwarded. The prompts CFN0, CFN1,and CFN2 may appear instead of CFNA,depending on the release installed onthe CS 1000 system. see your CS 1000system X21 documentation for details.5 Load overlay 15 again, and then for each prompt listed below, typethe response indicated:Prompt Response DescriptionREQ CHG ChangeTYPE FTRCUST xx Customer number (0-99)EEST (NO) YES Customer features and options Theoriginating party does not receive DTMFfeedback. Set remote CS 1000 sites toNO.6 Load overlay 15 again, and then for each prompt listed below, typethe response indicated:Prompt Response DescriptionREQ CHG ChangeTYPE NET NetworkingNortel CallPilotCommunication Server 1000 and CallPilot Server ConfigurationNN44200-312 01.02 Standard5.0 3 May 2007Copyright © 2007, Nortel Networks.
