10 Utility mode10-56 VarioLink 2221/2821/3621Utility mode Chapter 108 If “RX Doc. Settings”was set to “Forward”,specify a destination.– To add a new for-warding destination,touch [Next Destina-tion].– To view the details ofthe forwarding desti-nation, select thedestination, and thentouch [Detail].– To delete a forwarding destination, select the destination, and thentouch [Delete].9 Touch [Enter] in each screen until the standby screen (initial screen) ap-pears.To specify the procedure performed with documents received with anF-codeThis machine can be set to perform a specific operation when a document isreceived with an F-code.2 NoteUp to 10 F-codes can be specified.Settings can be specified for the following.Parameter DescriptionF-CODE Specify the F-code with which document management is per-formed.RX Doc. Settings Select how the document received with the specified F-codeis managed.Print: Select this setting to print the document.Forward: Select this setting to forward the data to the speci-fied recipient. Up to 300 forwarding recipients can be speci-fied.Print & Forward: Select this setting to print the document andforward it to the specified recipient. Up to 300 forwarding re-cipients can be specified.Forwarding Dest. Specify a destination when “RX Doc. Settings” is set to “For-ward”.
