11 Specifying settings using Web Connection11-38 VarioLink 2221/2821/3621Specifying settings using Web Connection Chapter 1111.12 RX Document (Administrator mode)The method for processing a received document can be specified.The processing methods consist of the following three methods.- F-Code: This machine can be set to perform a specific operation when adocument is received with an F-code.- Processing of documents received per line (Port): The processing of a re-ceived document such as printing and forwarding can be specified perline when the document is received.- Processing of other received documents (All Other Documents): Specifythe processing method of documents received by a line other than port.With “F-Code”, settings can be specified for the following.In “Port”, the following settings can be specified.Item DescriptionF-Code Specify the F-code with which document management is performed.F-CodePasswordSpecify the password for the F-code with which document management isperformed.Retype F-CodePasswordRetype the password for the F-code.Remote InputCheckTo limit viewing depending on the F-code password, select “On”.RX Doc. Set-tingsSelect how the document received with the specified F-code is managed.Print: Select this setting to print the document.Forward: Select this setting to forward the data to the specified recipient.Print&Forward: Select this setting to print the document and forward it to thespecified recipient.ForwardingDestinationSpecify a destination when “RX Doc. Settings” is set to “Forward”.Item DescriptionDistributionConditionsSelect whether to process the document of a selected line.Specifies: Specifies the save destination and forwarding destination of the re-ceived document.Default: Does not process the received document.RX Doc.SettingsWhen “Specifies” is specified in Distribution Conditions, select the processingmethod for the received document.Forward: Forwards the data to the specified destination.Print: Prints the document.Print&Forward: Prints the document and at the same time forwards the datato the specified destination.ForwardingDestinationSpecify when “Forward” is selected in RX Doc. Settings. Click [SelectForwarding Destination], select the forwarding destination address, and thenclick [Apply].