11 Specifying settings using Web Connection11-30 VarioLink 2221/2821/3621Specifying settings using Web Connection Chapter 1111.9 TX Settings (Administrator mode)Transmission settingsThe default settings for transmission can be specified.The following settings can be specified.Item DescriptionQuality/ModeDefault Quality Specify the quality default value that is reset after operation is complete.Default Density Specify the density default value that is reset after operation is complete.Com. Mode Specify the communication mode default value that is reset after operation iscomplete.FAX MenuTX Select the transmission method.Memory TX: Sends the data after the entire document is scanned.Quick Scan TX: Sends the document one page at a time.TSI Select the transmission source name.Off: Does not attach the transmission source name.Inside Body Text: Prints the transmission source name on the originaldocument.Outside Body Text: Does not print the transmission source name on theoriginal document.TSI Selection Select the name of the transmission source.Rotation TX Specify whether to reset the rotation transmission after the operation iscomplete.2-Sided TX Specify whether to reset the duplex transmission after the operation iscomplete.OriginalBindDirectionSelect the position of the document binding margin for double - sided trans-missions.
