10 Utility mode10-94 VarioLink 2221/2821/3621Utility mode Chapter 10Specifying settings to limit the use of communication modes-1 (mode475)Specify whether to permit or prohibit the use of individual communicationmodes. Prohibited communication modes do not appear in their selectionscreens.2 NoteProgrammed one-touch dial buttons can be used for transmission evenif a prohibited communication mode has been specified.If all communication modes are prohibited (modes 475 to 477), somescreens, such as those for specifying transmission settings, may not nor-mally be displayed.Settings at time of purchaseSpecifying the settingDuring the production of this unit, the settings in the shaded cells were se-lected. The numbers on the right side indicate the page numbers with de-scriptions for the corresponding function.Bit 7 6 5 4 3 2 1 0Setting 0 0 0 0 0 0 0 0 (HEX: 00)Bit Description Setting Description Page Refer-ence7 Specifies whether ornot the use of TCP/IP is prohibited.0 Permitted ----------1 Prohibited6 Specifies whether ornot the use of LPD isprohibited.0 Permitted ----------1 Prohibited5 Specifies whether ornot the use of aRAW port is prohib-ited.0 Permitted ----------1 Prohibited4 Specifies whether ornot the use of SLP isprohibited.0 Permitted ----------1 Prohibited3 Specifies whether ornot the use of aScan to FTP is pro-hibited.0 Permitted ----------1 Prohibited
