10 Utility mode10-100 VarioLink 2221/2821/3621Utility mode Chapter 10Specifying settings for limiting user authentication to only Scan func-tions (mode 479)Specify whether or not user authentication is performed only when the [Fax/Scan] or [Extra Scan] key is pressed.Settings at time of purchaseSpecifying the settingDuring the production of this unit, the settings in the shaded cells were se-lected. The numbers on the right side indicate the page numbers with de-scriptions for the corresponding function.2 ReminderDo not specify settings for mode 479 other than those described in“Specifying the setting”.!DetailIf user authentication is limited to Scan functions, touch [Account/UserAuth.] in the Administrator Management 1 screen, and then select “Exter-nal Server” as the user authentication method. For details on the externalserver authentication settings, refer to the User’s Guide [Copy Opera-tions].Bit 7 6 5 4 3 2 1 0Setting 0 0 0 0 0 0 0 0 (HEX: 00)Bit Description Setting Description Page Refer-ence7, 6, 5 ---------------------- 000 *Do not change these bitswhen specifying settingsfor this function.----------4, 3, 2, 1, 0 Specifies whether ornot to limit authenti-cation on Fax andScan functions.11001 Limited ----------00000 Not limited ----------
