11 Specifying settings using Web Connection11-22 VarioLink 2221/2821/3621Specifying settings using Web Connection Chapter 1111.5 System (Administrator mode)From the [System] tab, various settings concerning the system configurationof this machine can be changed. Settings for the following fax functions canbe specified.“Output Tray Settings” of “User’s Choice 5”“Default LCD Screen” and “Priority Fax Screen” of “User’s Choice 6”“Restrict One-Touch Editing” and “Activity Report E-mail Address” of “Ad-ministrator Settings”To change settings1 In the Administrator mode, click the [System] tab.– For the procedure to log on to Administrator mode, refer to “Log-ging on to Administrator mode” on page 11-8.2 Click [User’s Choice 5].3 Select the paper output tray for fax output.4 Click [User’s Choice 6].5 Specify the initial screen and fax screen that are given priority.6 Click [Apply].7 Click [Administrator Management].8 Click [Administrator Settings].9 Select a setting for “Restrict One Touch Editing”.– To prevent one-touch dial buttons from being registered orchanged from the User Setting screen, select “On”.– To allow one-touch dial buttons to be registered or changed fromthe User Setting screen, select “Off”.10 Specify a setting for “Activity Report E-Mail Address”.– Type in the e-mail address of the computer. The CSV file of the ac-tivity report is sent to the specified e-mail address.11 Click [Apply].
