2 Transmission2-34 VarioLink 2221/2821/3621Transmission Chapter 22.9 Operations while scanningIf document size cannot be detectedIf the size of the document cannot be detected, the document cannot bescanned.If this occurs, touch [Reduction/Area], then [Original Size Set.], and thenspecify the size.!DetailFor details on the settings available on the Quality & Reduction screen,refer to “Specifying the transmission settings” on page 2-9.If memory became fullIf many documents are stored in the memory (“Memory Free” is nearly 0%),it may not be possible to send the fax. In addition, if the document containsmany pages or if the data is large, such as when the document containsmany fine details, the memory may become full and the fax cannot be sent.If this occurs, clear some of the memory or send the “Quick Scan TX” func-tion.!DetailFor details on the “Quick Scan TX” function, refer to “Sending a docu-ment one page at a time (“Quick Scan TX” function)” on page 6-21.2 NoteIf the fax could not be sent, you can send it again since it remains in thememory. This data can be deleted to clear some of the memory.
