4 Troubleshooting4-6 VarioLink 2221/2821/3621Troubleshooting Chapter 44.3 Error messagesIf a machine malfunction occurs, the error screen appears with one of the fol-lowing error messages. Refer to the following table, and then perform the in-dicated operation.If correct transmission are still not possible, even after performing the de-scribed operations, contact your technical representative.!DetailFor details on troubleshooting procedures for document misfeeds, papermisfeeds, poor print quality, or empty toner, refer to the User’s Guide[Copy Operations].If any message other than those listed above appears, perform the operationdescribed in the message.Error message Cause RemedyOriginal size cannot be detect-ed.The paper size of the documentcannot be detected.Select the paper size ofthe document.This mode cannot be set withXXX.Functions that cannot be usedtogether are selected.Make copies using onlyone of the functions.The job has been deleted. Notenough remaining memory.The memory is full. If documents stored in thememory are waiting to beprinted, print them.Malfunction detected. Pleasecall your Technical Representa-tive.Some malfunction occurred inthe machine.Inform your technical rep-resentative of the codedisplayed on the touchpanel.
