Utility mode 10VarioLink 2221/2821/3621 10-97Utility mode Chapter 10Specifying settings to limit the use of communication modes-3/Specify-ing restrictions for registering fax addresses and printing reports andspecifying how one-touch dial recipients are displayed (mode 477)Specify whether to permit or prohibit the use of individual communicationmodes. Prohibited communication modes do not appear in their selectionscreens.Specify whether or not fax addresses can be registered and reports can beprinted by users, and specify whether or not one-touch dial information isdisplayed in screens and reports.2 NoteProgrammed one-touch dial buttons can be used for transmission evenif a prohibited communication mode has been specified.If all communication modes are prohibited (modes 475 to 477), somescreens, such as those for specifying transmission settings, may not nor-mally be displayed.Settings at time of purchaseSpecifying the settingDuring the production of this unit, the settings in the shaded cells were se-lected. The numbers on the right side indicate the page numbers with de-scriptions for the corresponding function.Bit 7 6 5 4 3 2 1 0Setting 0 0 0 0 0 0 0 0 (HEX: 00)Bit Description Setting Description Page Refer-ence7 Specifies whether ornot the use of thecomputer (scanner)is prohibited.0 Permitted ----------1 Prohibited6 Specifies whethersettings for register-ing fax addresses orprinting reports canbe specified by onlythe administrator oralso by the user.0 Settings can also bespecified by users.p. 10-481 Settings can only bespecified in Administratormode.
