Oki COREFIDO B822dn User Manual

Changing settings from the operator panel- 115 -ItemFactorydefaultsettingDescriptionSystemAdjustPower Save Time 1 minute Sets the time to switch to power savingmode.Value range: 1 minute, 2 minutes, 3 minutes,4 minutes, 5 minutes, 10 minutes, 15minutes, 30 minutes, and 60 minutesSleep Time 1 minute Sets the time to shift from power savingmode to sleep mode.Value range: 1 minute, 2 minutes, 3 minutes,4 minutes, 5 minutes, 10 minutes, 15minutes, 30 minutes, and 60 minutesAuto Power Off Time 4 hours Sets the time to turn off the powerautomatically after entering standby mode.Value range: 1 hour, 2 hours, 3 hours, 4hours, 8 hours, 12 hours, 18 hours, and 24hoursClearable Warning OK button Sets the timing to clear the recoverable errordisplay.Auto Continue Off Sets whether or not to automatically restorethis machine when a memory overflow ortray request occurs.Manual Timeout 60 seconds Sets the waiting time for loading the paperwhen you print with [Feed paper individually]checked in the printer driver.Value range: Off, 30 seconds, and 60secondsTimeout Injob 40 seconds Sets the time from loss of the data receipt(canceled by PostScript) until force-printing.Value range: Off, 5 seconds, 10 seconds, 20seconds, 30 seconds, 40 seconds, 50seconds, 60 seconds, 90 seconds, 120seconds, 150 seconds, 180 seconds, 210seconds, 240 seconds, 270 seconds, and300 secondsTimeout Local 40 seconds Sets the time to keep each port open afterprinting. (Excluding the network)It can be set from 0 seconds to 300 secondsin increments of 5 seconds.Timeout Network 90 seconds Sets the time to keep the network port openafter printing.It can be set from 0 seconds to 300 secondsin increments of 5 seconds.Jam Recovery ON Sets whether to reprint pages not printeddue to a paper jam after the paper jam iscleared.When [Off] is selected, the printing processincluding pages missed due to the paper jamwill be canceled.Error Report Off Sets whether to print an error report when aninternal error occurs.Hex Dump Execute Prints the data received from the PC inhexadecimal dump. To exit this mode, turnoff the power.