Oki COREFIDO B822dn User Manual

Troubleshooting- 434 -Symptom Cause Solution ReferenceThe memory isinsufficient.The memory of thismachine is insufficientas the print data is toobig.Print again after reducing the resolution in theprinter driver.-All pages are notprinted.The WSD port is used. Change the print destination port to thestandard TCP/IP port.-Printing, printer searchor setup is notavailable in the sleepmode.The NBT/WINSprotocol is suppressedin the sleep mode.Press the scroll buttons on the operator panelto select [Specific] from [Admin Setup] - [USBSetup] - [Connected Host].-Periodic email alertsare not notified in thesleep mode.Periodic email alertsnotification issuppressed in thesleep mode.Press the scroll buttons on the operator panelto select [Specific] from [Admin Setup] - [USBSetup] - [Connected Host].-The time and datesettings of thismachine may beshifted if acquired fromthe server.The time updatefunction with the SNTPserver is suppressed inthe sleep mode.Press the scroll buttons on the operator panelto select [Specific] from [Admin Setup] - [USBSetup] - [Connected Host].-Printing is slow. Printing is alsoperformed on the PCside.Use a PC with a fast processing speed. -In the [Job Options]tab of the printerdriver, [Extra Fine(Multi-Tone)] or [Fine(1200x1200dpi)] isselected.Select [Normal (600x600dpi)] in the [Advanced]or [Job Options] tab of the printer driver.-The print data iscomplicated.Select simple print data. -Narrow paper (lessthan 230mm) is used.Press the scroll buttons on the operator panelto select [Menus] - [Print Adjust] - [NarrowPaper Speed], and change the setting.-The temperature isadjusted because thetemperature inside thismachine has risen dueto long-timecontinuous printing.Please wait.The printing will automatically resume once thetemperature of this machine returnsappropriate.-The ultra light papercare mode is in use.Press the scroll buttons on the operator panelto select [Menus] - [Print Adjust] - [Ultra LightPaper Care Mode], and change the setting.-Display of the printerdriver is abnormal.The printer driver maynot work correctly.Delete and reinstall the printer driver. Deletingsoftware(P.363)Installingsoftware(P.256)The power turns offautomatically.If this machine has notbeen used for a certainperiod of time (whosefactory default settingis 4 hours), the powerwill turn offautomatically. Thisfunction is called AutoPower Off.Press the scroll buttons on the operator panelto select [Admin Setup] - [Power Setup] - [AutoPower Off] - [Disable].Turning off thepowerautomatically(Auto PowerOff)(P.106)