Oki COREFIDO B822dn User Manual

Preparing and connecting this machine to your PC- 61 -15 When "Connection successful." is displayed, the connection to the wireless LAN access point iscompleted.16 Go to "6. Checking the connection from a PC (P.62)". When "Not connected to wireless access point" is displayed, repeat the procedure from Step 4. If you cannot connect, see "Troubleshooting for wireless LAN connection(P.414)". For segment-based communication with a wireless LAN (infrastructure), refer to "5. Choosing a valid defaultgateway(P.61)".5. Choosing a valid default gatewayBy default, [Enabling Default Gateway] is set to [Wired(LAN1)]. This machine can use a wired LAN andwireless LAN at the same time, but only either of them can be used to connect a terminal outside the segment(a different subnet).When a wireless LAN (infrastructure) is used to communicate across segments, follow the following procedureto change into [Wireless(Infrastructure)].1 Check that "Ready To Print" appears on the display.If the machine is in the power saving mode, press «OK» to restore.2 Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and thenpress «OK».3 Press ▲ or ▼ to input the admin password, and press «OK».Admin Password(P.207)4 Check that [Network Setup] is selected, and press «OK».