Oki COREFIDO B822dn User Manual

Basic operations- 83 -Media type Paper size Paper weight Other conditionsLabel A4 Total weight: 0.1 ~0.2mmLabels for electrophotographic printers ordry PPCs where the surface paper,adhesive, and backing are not degradedby heat.Media with a structure that prevents thefront paper from peeling off from thebacking in the heat fixing process of theprinter.Media with a structure that prevents thefront paper from peeling off the backingwhen the paper is traveling.Media with a combined weight of 0.1 to0.2mm of front paper and backing.Media whose surface paper covers theentire backing sheet with no adhesivesticking out.Media with no breaks or creases.Duplex printing is not available.LetterPartially printedpaperEquivalent to plain paper For simplex printing:60 ~ 220g/m 2For duplex printing:60 ~ 162g/m 2Media whose ink used for partial printingis heat resistant and can withstand230°C.Colored paper Equivalent to plain paper For simplex printing:60 ~ 220g/m 2For duplex printing:60 ~ 162g/m 2Media whose pigment or ink used to colorthe paper is heat resistant and canwithstand 230°C.Media made of electrophotographicpaper with the same features as plainpaper.Long paper Width: 210 ~ 297 mmLength: 421 ~ 1,321 mm128g/m 2Recommended paperMedia type NamePlain Excellent paper A3 (Model name: PPR-DA3TDB)Excellent paper A4 (Model name: PPR-DA4TDB)Recycled Oji Paper Recycled PPC Paper 100Label LBP-F7xxx series (Kokuyo) (Total weight: 0.1 - 0.2 mm) If the paper grain direction does not match the paper feeding direction, paper jams may occur. Printing from the MP Tray may cause wrinkles. In this case, feed paper from the paper cassette. The paper wrapper shows the orientation of the surface. Load paper properly so that the face side is the printing side. The paper is wrapped in moisture-proof paper to prevent moisture. Please use the paper as early as possible afteropening its package. Wrap unused paper in the wrapping paper, and keep it away from moisture absorption as much as possible. If it is used beyond the normal room temperature (temperature: 17°C to 25°C; humidity: 40% to 60%), the printingquality may be degraded or problems may occur such as paper jams, wrinkles, curls, and warpage. Depending on the installation environment of the machine, printing on paper that contains moisture may cause whitesteam or water droplets to appear around the paper exit area of the machine. This is not abnormal because the heatgenerated when the toner is fixed to the paper evaporates the moisture contained in the paper.