Oki COREFIDO B822dn User Manual

Useful software- 282 -Transferring print data to the registered deviceThis section explains how to transfer the specified print data to a registered device using the OKI LPR Utility.This section also explains how to transfer the print data to another device when a problem occurs on thedestination device. Print data can be transferred only to devices with the same model name as your device. Before transferring print data, a device must be added.Transferring the selected print data1 Start the OKI LPR Utility.2 Select [Job Status] from the [Remote Print] menu.3 Select the print data to be transferred, and select [Redirect] from [Job] menu.4 Select the destination device, and click [OK].Automatically transferring print dataWhen this machine cannot print since it is busy, offline, out of paper, etc., you can set the print data to beautomatically transferred to another OKI machine. Administrator privileges are required.1 Start the OKI LPR Utility.2 Select the machine to set.3 Select [Confirm Connections] from the [Remote Print] menu.4 Click [Detail Setup].5 Check [Automatic Job Redirect Used].6 To transfer the print data only when an error occurs, check [Redirect only at the time of an error].7 Click [Add].8 Input the IP address of the destination device, and click [OK].9 Click [OK].Printing the same document from multiple registered devicesYou can print from multiple devices with a single order. Administrator privileges are required.1 Start the OKI LPR Utility.2 Select the machine to set.3 Select [Confirm Connections] from the [Remote Print] menu.4 Click [Detail Setup].