Oki COREFIDO B822dn User Manual

Management of this machine- 244 -Using the machineWhen access control is enabled, the home screen of this machine changes to the login screen, and userauthentication is required.This section explains the login method to this machine by authenticating a user name and password.1 Check that "Ready To Print" appears on the display.If the machine is in the power saving mode, press «OK» to restore.2 Press the scroll button ▲ or ▼ on the operator panel to select [Local Name], and then press«OK».3 Input your own user name, and then press «OK».4 Press ▲ or ▼ to input the password, and then press «OK».5 Login is complete when "Ready To Print (logged in)" is displayed. The home screen is displayed. You will be automatically logged out after a certain period of time without operating the panel.Printing from a PCIf access control is enabled, when printing from a PC, input user information in the printer driver to print.For WindowsIn this example, Notepad is used to print from the PCL driver.1 Select [Print] from the [File] menu.2 In [Select Printer], select the required printer driver, and click [Preferences].3 Select the [Extend] tab.4 Click [User Authentication].5 Set [User name] and [Password] of the user as user authentication information, and[Authentication Type] to specify the authentication destination and authentication mode of theuser.[Password], [Authentication Type], and [Use User Authentication] may not be displayed in the screen dependingon the setting of [User Authentication Options] in [Device Options] tab.