Oki COREFIDO B822dn User Manual

Changing settings from the operator panel- 117 -ItemFactorydefaultsettingDescriptionTrans. Black Setting 0 Used for fine adjustment in case ofnoticeable blur etc. in the print results duringprinting when [Transparency] is selected as[Media Type]. Decreases the value if printingsuch as scattered or snow-covered printingoccurs in high-density printing. Increases thevalue if printing is blurred. Adjusts within therange of ±2.SMR Setting 0 Corrects printing variations due todifferences in temperature and humidity, andprinting density/printing frequency. Changesthe value if there is burr in the image.Adjusts within the range of ±3.BG Setting 0 Corrects printing variations due todifferences in temperature and humidity, andprinting density/printing frequency. Changethe value if the underlay is dark. Adjustswithin the range of ±3.VL Cleaning Execute Improves the printing result when there arewhite streaks in the vertical direction.Drum Cleaning OFF Sets to empty the drum before printing whenwhite streaks appear in the horizontaldirection. When [ON] is set, the remainingservice life of the image drum will beshortened.High Humid Mode Off The paper may curl when the paper isejected at a high humidity. Set this setting to[Mode1] or [Mode2] to reduce the curlingeffect.The printing time is longer than the case of[Off].When [Mode1] or [Mode2] is set, the servicelife of the image drum will be shortened.Narrow Paper Speed Mode1 Sets the printing speed when narrow paperis used.[Mode1] or [Mode3]:This is the recommended mode for massiveprinting on narrow paper (with a width of 230mm or less).Switches the speed to a low speed whenprinting on narrow paper.[Mode2]:The recommend mode for printing on asmall amount of narrow paper. Prints onnarrow paper without reducing the speed.When printing on a large amount of narrowpaper, it is easier to begin the waiting timefor fixing temperature adjustment.