Oki COREFIDO B822dn User Manual

Printing from a PC- 160 -7 Make settings as follows in [Media].If you selected [Labels] on the operator panel when you loaded labels in the machine, select [PrinterSettings] in [Media].In other cases, select [Labels] in [Media].8 Specify other settings as necessary, and click [OK].If you want to print while checking each sheet, check [Feeds paper one by one from the MP tray] in [Advanced]on the [Layout] tab of the printer driver (or select [Yes]). To print continuously, uncheck [Feeds paper one by onefrom the MP tray] (or select [No]). For details, see "Printing one sheet at a time manually(P.168)".9 Click [Print] in the [Print] screen.For macOS PCL printer driver1 Open the file to be printed.2 Select [Print] from the [File] menu.3 Select [A4] or [Letter] from [Paper Size].4 Select the [Setup] panel.5 Select the tray where labels are loaded from [Paper Source].6 Make settings as follows in [Media Type].If you selected [Labels] on the operator panel when you loaded labels in the machine, select [PrinterSetting] in [Media Type].In other cases, select [Labels] in [Media Type].7 If necessary, click [Paper Feed Options], check [Long Edge Feed], and click [OK].8 Specify the media weight and other settings as necessary, and click [Print].If you want to print while checking each sheet, select [MP Tray] from [Source] in the printer driver, and check[Use the MP tray for manual feeding] of [Paper Feed Options] (or select [Yes]). To print continuously, uncheck[Use the MP tray for manual feeding] (or select [No]). For details, see "Printing one sheet at a timemanually(P.168)".If there is no detail settings displayed in the [Print] screen, click [Show Details] at the bottom of the screen.For macOS PS printer driver1 Open the file to be printed.2 Select [Print] from the [File] menu.3 Select [A4] or [Letter] from [Paper Size].4 Select the tray where labels are loaded from [All Pages From] in the [Paper Feed] panel.5 Select the [Paper Feed] tab on the [Print Options] panel.6 Make settings as follows in [Media Type].If you selected [Labels] on the operator panel when you loaded labels in the machine, select [PrinterSetting] in [Media Type].In other cases, select [Labels] in [Media Type].