Oki COREFIDO B822dn User Manual

Preparing and connecting this machine to your PC- 66 -3-1. Auto connection (Push button)If the wireless terminal supports WPS-PBC (push button), you can connect it to this machine using the WPSbutton.1 Check the position of the WPS button in the User's Manual enclosed with the wireless terminal.2 Press the scroll button ▼ on the operator panel several times to select [Wireless(AP Mode)Setting], and press «OK».3 Press ▲ or ▼ to input the admin password, and press «OK».Admin Password(P.207)4 Press ▲ to select [Enable], and press «OK».5 Press ▼ to select [Automatic Setup (PushButton)] , and then press «OK».6 When "Implementing this method? Pushbutton method" is displayed, check that [Yes] is selected,and press «OK».No image"Running pushbutton method" is displayed, and this machine will start to search for a wireless LAN accesspoint.No image7 Start WPS-PBC (push button) on the wireless terminal."Running pushbutton method" is displayed for about 2 minutes. Start the push button on the wireless terminalwhile it is displayed.While "Running pushbutton method" is displayed, the operator panel of this machine is disabled.8 When "Connection successful." is displayed, the connection is completed.If the connection fails, follow the procedure in "3-2. Manual connection(P.67)" to connect again.Then, go to "Installing software on a PC (P.69)".When using a mobile device, go to "Printing from a mobile device(P.289)".