Oki COREFIDO B822dn User Manual

Preparing and connecting this machine to your PC- 57 -If no wireless LAN access point is found, only [Manual Setup] is displayed. In that case, make settings byfollowing "4-3. Manual setup and connection (P.59)".8 When the encryption key entry screen suitable for the encryption method of the selected wirelessLAN access point is displayed, input the encryption key recorded in Step 1, and press «OK».The encryption key varies with the wireless LAN access point and security method. If "WPA Pre-shared key" is displayedEncryption method: WPA/WPA2-PSK or WPA2-PSKEncryption key: Input the WPA Pre-shared key. If "Please set in Web" is displayedEncryption method: WPA/WPA2-EAP or WPA2-EAP* Set from the web page of this machine. If "WEP Key" is displayedEncryption method: WEPEncryption key: Input the WEP key. In other casesEncryption method: Disable (Invalid)No need to input the encryption key.9 "Implementing this method?" is displayed, and the SSID selected in Step 7 from the confirmationscreen and the encryption method input in Step 8 are displayed as the security method. If theSSID is the same as the one recorded in Step 1, press «OK».10 When "Connection successful." is displayed, the connection to the wireless LAN access point iscompleted.11 Go to "6. Checking the connection from a PC (P.62)". When "Not connected to wireless access point" is displayed, repeat the procedure from Step 4, or try "4-3. Manualsetup and connection(P.59)".4-2. Connecting with WPSIf the wireless LAN access point supports WPS, you can easily connect to the wireless LAN using the pushbutton for easy setup (WPS button).1 Check the position of push button for easy setup (WPS button) and the time for which the buttonis pressed in the User's Manual enclosed with the wireless LAN access point.2 Check that the wireless LAN access point is activated and operating properly.