Oki COREFIDO B822dn User Manual

Printing from a PC- 165 -15 Press «CANCEL» to return to the standby screen.16 Load paper in the tray to be used. When the setting change screen is displayed, press «BACK».Loading paper in Tray1/2/3/4(P.87)Loading paper in the MP Tray(P.91)Printing from a PC If you are using B822, refer to the PCL printer driver section.For Windows PCL printer driver1 Open the file to be printed.2 Select [Print] from the [File] menu.3 Click [Preferences].4 Click [Paper Feed Options] in the [Setup] tab.5 Click [Custom Size].6 Input a name for the new size in [Name].7 Input values in [Width] and [Length].8 Click [Add] to save any media size in the list, and click [OK].Up to 32 settings can be saved.9 Click [OK] until the [Printing Preferences] screen is closed.10 Open the file to be printed.11 Select [Print] from the [File] menu.12 Click [Preferences].13 Select the media size registered in [Size] on the [Setup] tab.14 Specify the media weight and other settings as necessary, and click [OK].15 Click [Print] in the [Print] screen.For the Windows PS printer driver1 Open the file to be printed.2 Select [Print] from the [File] menu.3 Click [Preferences].4 Click [Advanced] in the [Layout] tab.5 Click [Paper Size], and select [PostScript Custom Page Size] from the pull-down menu.6 Click [PostScript Custom Page Size Definition].7 Input values in [Width] and [Height], and click [OK].[Offset Relative to Paper Feed Direction] cannot be set.8 Click [OK] until the [Printing Preferences] screen is closed.