Maintenance- 328 -Replacing the maintenance kitThe maintenance kit is a set of a fuser and a transfer roller. Follow the procedure below to replace the fuserand transfer roller at the same time.1 Prepare a new maintenance kit and check that you have all the parts.FuserTransfer roller2 Open the output tray by holding its center.Burns may be caused.As the fuser may be hot, be cautious during operation and always hold the handle to lift it. When it is hot, wait until itcools down before any operation.3 Unlock the fuser by rotating the blue lock lever on the left side in the direction of the unlock markuntil it stops.

Oki COREFIDO B822dn User Manual