Oki COREFIDO B822dn User Manual

Management of this machine- 221 -5 Configure the settings following the on-screen instructions.If nothing is registered in [Administrator's IP Address setting], access to this machine may be disabled dependingon the specified IP address range.If you are using a proxy server, [Your Current Local Host/Proxy IP Address] may not match the IP address of thecurrent host.6 Click [Apply]. IP filtering is applicable only to IPv4.Using the access control function with the MAC addressYou can use the MAC Address to control the access to this machine. You can allow or deny the access fromthe specified MAC Address. Be sure to specify the correct MAC address. If you specify an incorrect MAC address, you will not be able to accessthe machine using the network.1 Open the web page of this machine.Opening the web page(P.213)2 Log in as an administrator.Logging in as an administrator(P.214)3 Select [Network Setup].4 Click the Menu button on the upper right corner, select [Security] - [MAC Address Filtering], andthen select [Enable] on the displayed screen.5 Configure the settings following the on-screen instructions.If nothing is registered in [Administrator's MAC Address setting], access to this machine may be disableddepending on the specified MAC address range.If you are using a proxy server, [Your Current Local Host/Proxy MAC Address] may not match the MAC addressof the current host.6 Click [Apply]. You cannot specify the access control individually for each address.Notifying errors via e-mailErrors of consumables or maintenance parts are notified via e-mail. You can also set the timing of notification.1 Open the web page of this machine.Opening the web page(P.213)2 Log in as an administrator.Logging in as an administrator(P.214)3 Select [Network Setup].