Oki LE850 Technical Reference
Also see for LE840: User guide
                                                                                                                                                                                    | |
Contents |
- 115 -8.76 ^JM SET DOTS PER MILLIMETERFormat: ^JMnn = Dot/mm settingA : OnceB : TwiceDefault: "DOT/MM" in the Z-MODE parameterWhen omitted: This command is ignored.* When this is set to B, the bar code is issued in twice the actual size.(When magnification with MU command is applied, the bar code is issued in twice the magnifiedsize.)*1 While the individual position and size vary depending on whether the ^MU/^JM command is placedbefore or after ^FO/^FT/^LH/^LS/^LL/^PW or other command with Zebra, the position and the sizevary per label with Oki Data.*2 Drawing running over in the horizontal direction is printed as it is with Oki Data. However, whenmagnified, the portion running over the set width is not printed. In the case of Zebra, drawingrunning over the set width is not printed. (If the drawing data before magnification is set to a valueexceeding the set width after magnification, the drawing data before magnification is printed withoutbeing magnified horizontally.*3 While the Zebra printing width is not enlarged with this command, it is enlarged with Oki Data.*4 While magnified printing is not permitted for ^BD (UPS Maxicode) or ^BR (GS1 DataBar) withZebra, magnified printing is performed with Oki Data. |
Related manuals for Oki LE840
manualsdatabase
Your AI-powered manual search engine