Oki LE850 Technical Reference

Also see for LE840: User guide

Contents

general description

- 38 -8.6 ^B8 EAN-8 BAR CODEFormat: ^B8o,h,f,go = Font rotationN : 0°R : 90°I : 180°B : 270°When omitted: Value of ^FW* The point of origin differs depending on the coordinate designated in ^FT and ^FO.h = Bar code height (in dots)203-dpi printer: LE8401 to 800 dots300-dpi printer: LE8501 to 1200 dotsWhen omitted: Value of ^BY*1 If the value after dot-to-mm conversion exceeds 100 mm, it is corrected to 100 mm.*2 If 0, a character string, or other value is selected, it is corrected to 10 dots.f = Print interpretation lineY : PrintedN : Not printedWhen omitted: Yg = Print interpretation line above codeY : PrintedN : Not printedWhen omitted: N*1 The character type of the interpretation line is switched depending on the set value for the modulewidth of ^BY.In the case of 203-dpi printer:Module width is 2 or less: Font AModule width is 3 or more: Font EIn the case of 300-dpi printer:Module width is 4 or less: Font AModule width is 5 or more: Font E*2 Data other than numeric values, if any, are converted to ‘0.’*3 To print the interpretation line above code, the interpretation line parameter (parameter f) needs tobe set to “Y.”*4 If the command is sent without setting data (only ^FS and ^XZ are set while ^FD^FS and ^FD arenot set), the barcode will not be printed.