Oki LE850 Technical Reference
Also see for LE840: User guide
                                                                                                                                                                                    | |
Contents |
- 34 -*8 While Font 0 is scalable, as the loaded fonts are different from those for Zebra, the font, size, spacebetween characters, etc. may differ.*9 In the case of Zebra, the font selected in ^CF command is used when the name of nonexistent fontis selected. However, in the case of Oki Data, the font to be used follows the font conversion tablein ZDEFAULT.TXT.*10 When OKI outline font is selected, the print image of character data using ^SN, ^SF, ^FV, or ^FCcommand collapses from the second page on.8.2 ^A@ USE FONT NAME TO CALL FONTFormat: ^A@o,h,w,d:o.xo = Font rotationN : 0°R : 90°I : 180°B : 270°When omitted: Value of ^FW* The point of origin differs depending on the coordinate designated in ^FT and ^FO.h = Character height (in dots)Font 0:10 to 32000 dots* Through correction, the final size shall be in the range from 1 mm to 150 mm.Other than font 0:If the character height exceeds 9.5 times the font standard height, it is corrected to 9.5 times.When omitted: Calculated from the width based on the ratio.If both height and width are omitted, the height is calculated from the value in ^CF.w = Character width (in dots)Font 0:10 to 32000 dots* Through correction, the final size shall be in the range from 1 mm to 150 mm.Other than font 0:If the character width exceeds 9.5 times the font standard width, it is corrected to 9.5 times.When omitted: Calculated from the height based on the ratio.If both height and width are omitted, the width is calculated from the value in ^CF.d = DriveR: RAME: On-board Flash ROMB: USB memoryA: USB memoryWhen omitted: R:o = File nameWhen omitted: UNKNOWNx = ExtensionWhen omitted: FNT*1 When Font 0 is selected, the print image collapses if there exists other print data in the printingarea.*2 The referable font names (“d:o.x”) are limited to those in the “Font Conversion Table” or those inthe max. of seven downloaded TTFs.A font name is valid only when all of the drive, file name, and extension are perfectly |
Related manuals for Oki LE840
manualsdatabase
Your AI-powered manual search engine