Oki LE850 Technical Reference

Also see for LE840: User guide

Contents

general description

- 71 -8.38 ^FB FIELD BLOCKFormat: ^FBa,b,c,d,ea = Text block/line width (in dots)0 to 832: LE8400 to 1238: LE850When omitted: “Rectangle width” in the default setting tableb = Maximum number of lines in text block1 to 99When omitted: “Number of rows in the rectangle” in the default setting tablec = Space between lines (in dots)99 to 44: LE84099 to 600: LE850When omitted: “Space between lines in dots” in the default setting table(Note) When “Character height + Space between lines in dots” is 1 mm or less, correct the spacebetween lines in dots so that it will be 1 mm.d = Text justificationL : LeftC : CenterR : RightJ : JustifiedWhen omitted: “Text justification” in the default setting tablee = Indent in field block (in dots)0 to 832: LE8400 to 1238: LE850When omitted: “Text justification X-coordinate correction value” in the default setting table*1 In some cases, operation is not performed properly when this command is used with ^FP (fieldparameter) or ^TB (text block).*2 If the set value in ^FB exceeds the maximum field block width, word-wrap is applied at the papermaximum width. Meanwhile, the code bar is also affected by wrap-around.*3 If the text block/line width parameter value is smaller than the minimum value or larger than themaximum value, the width is rounded to the minimum value or the maximum value, respectively.In the case of 203-dpi printerModule width is 2 or less: Font AModule width is 3 or more: Font ELE840Minimum value: 40 dotsMaximum value: 832 dotsLE850Minimum value: 60 dotsMaximum value: 1238 dots