- 152 -5. Fax[TTI] is enabled by factory default, resulting in the name that you specify with [Sender ID]printed on faxes as [Standard TTI]. To use any sender name (originator) other than [StandardTTI], follow the procedure below.1 Press the (FAX) button on the operator panel.2 Set a document in the ADF or on the document glass.3 Check that [Fax] is selected, and then press the button.4 Press the button to select [Fax Functions] and press the button.5 Press the or button to select [TTI Select] and press the button.To select an originator, you must register the sender name (originator) in advance.Registering the Sender Name (Originator)6 Press the button to select sender ID you want to use, and then press the(OK) button.7 Specify a destination.Entering Fax Number to Send a Fax (User's Manual)Specifying a Destination from Phone BookSpecifying a Destination Using One-touch ButtonSpecifying a Destination from Transmission History and Reception History8 Change other settings if necessary, and then press the (MONO) button.Disclosing a Sender Name (Originator) to the RecipientYou can change other settings for fax transmissions.Setting Scanning for TransmissionEntering Fax Number to Send a Fax (User's Manual)Set whether to automatically print transmission results.The default value can be changed by pressing the (SETTING) button on the operator panel and selecting[Admin Setup] > [Fax Setup] > [Default Settings] > [Transmit Confirmation Report].1 Press the (FAX) button on the operator panel.2 Set a document in the ADF or on the document glass.3 Check that [Fax] is selected, and then press the button.4 Press the button to select [Fax Functions] and press the button.5 Press the or button to select [Transmit Confirmation Report] and pressthe button.6 Select [ON] if you want to print or [OFF] if not, and press the (OK) button.7 Specify a destination.Entering Fax Number to Send a Fax (User's Manual)Specifying a Destination from Phone BookSpecifying a Destination Using One-touch ButtonSpecifying a Destination from Transmission History and Reception History8 Change other settings if necessary, and then press the (MONO) button.You can change other settings for fax transmissions.Setting Scanning for TransmissionEntering Fax Number to Send a Fax (User's Manual)Changing the Sender Name That is Printed on Faxes Printing Transmission Results Automatically (Transmit Conf.Report)
