- 84 -4. Print6 Open the file to print.7 Select [Print] from the [File] menu.8 Click [Advanced].9 Click [Advanced] on the [Layout] tab and select [PostScript Custom PageSize] from [Paper size].10 Click [OK].11 Select [Multi-Purpose Tray] from [Paper Source] on the [Paper/Quality] tab.12 Change other settings if necessary, and then click [OK].13 Click [Print] on the [Print] screen.For Mac OS X1 Open the file to print.2 Select [Print] from the [File] menu.3 Select [Manage Custom Sizes] from [Paper Size].4 Click [+] to add an item to the list of paper sizes.5 Double-click [Untitled], and then enter a name of the long paper size.6 Enter values in [Width] and [Height].7 Click [OK].8 Select the registered paper size from [Paper Size].9 Select [Multi-Purpose Tray] for [All Pages From] on the [Paper Feed] panel.10 Change other settings if necessary, and then click [Print].If setting details are not displayed in the print dialog box, click [Show Details] at the bottom of the dialog box.• Loading Custom Size Paper• For Windows PCL Printer Driver• For Windows PS Printer Driver• For Mac OS XSet a custom paper size and paper type on the operator panel. Then, register a paper sizewith a printer driver.Paper sizes of 64 to 216 mm in width and 90 to 1321 mm in length can be registered.• Register paper in portrait, and load paper in a tray in portrait.• If the paper length exceeds 432 mm (17 inches), use the rear output tray.• This function may not be available for some applications.• If the paper length exceeds 432 mm (17 inches), the print quality cannot be guaranteed.• If paper is so long that it exceeds the paper supports of the MP tray, support the paper with your hands.• It is not recommended to use a paper width of less than 100 mm (3.9 inches), because paper jams may result.• About available paper sizes for each tray and for duplex printingLoading Paper (User's Manual)• The auto tray switch function is set to [ON] by factory default. When a tray runs out of paper during printing, anothertray automatically starts feeding paper. To feed custom size paper from a specified tray, set the auto tray switchfunction to [OFF].• If images are not correctly printed on large size paper, select [Normal(600x600dpi)] for [Quality] in the PS printerdriver. Printing may be improved.Loading Custom Size PaperWhen printing on custom paper size, change the paper type setting, and specify a paper tray.1 Load paper that can be set to the custom size in the MP tray or tray.2 Press the (SETTING) button on the operator panel.3 Press the button to select [Paper Setup] and press the button.4 Press the or button to select the tray on which paper is loaded in step1, and then press the button.5 Check that [Paper Size] is selected, and then press the button.Printing on Custom Size Paper
