- 269 -9. Operating Management/ Specifications• Default Settings• Fcode Box• Security Function• Other SettingsFax SetupItem FactorydefaultsettingDescriptionResolution Normal Sets the default image quality.Background Removal Auto Sets the default setting of the backgroundremoval.Density 0 Sets the default density to scan.Scan Size A4 or Letter Sets the default scan size.Continuous Scan(Glass) OFF Sets whether to use Continuous Scan.Continuous Scan(ADF) OFFEdge Erase Setting OFF Sets whether to erase the edge shadowcreated on Fax scan image.Width 2 mm (0.1 inch) Sets an erasing width created on Fax scanimage.TTI ON Sets whether to add the sender's name to theheader of the sent fax by default.Transmit Confirmation Report OFF or ON Sets whether to automatically printtransmission results by default.Memory Tx ON Sets whether to use memory transmission(ON) or real-time transmission (OFF) bydefault.Item FactorydefaultsettingDescriptionEdit / Register ConfidentialBoxBox Name (NULL) Sets the name for confidential boxes. Youcan enter up to 16 characters.Sub-Address (NULL) Sets the sub-address for confidential box.You can enter up to 20 characters.Hold Time 0 Sets the hold time for confidential box.Available range: 0 to 31 daysI.D.Code (NULL) Sets the password for confidential box.Register a 4-digit numerical number only.Bulletin Box Box Name (NULL) Sets a bulletin box name. You can enter up to16 characters.Sub-Address (NULL) Sets the sub-address for bulletin box. Youcan enter up to 20 characters.Delete Deletes an Fcode box.Item FactorydefaultsettingDescriptionID Check Tx OFF Sets whether to use the ID checktransmission.Broadcast Destination ON Sets whether to indicate the transmissiondestination number before starting broadcasttransmission.Confirm Dial OFF Sets whether to reenter the transmissiondestination fax number before sending a fax.Manual Input Enable Sets permission of manual input.Secure Receive Setting OFF Sets whether to store a received fax in thememory of this machine without printingimmediately.Password (NULL) Sets the password that is entered whenprinting a received fax image that is stored inthe memory of this machine.Item FactorydefaultsettingDescriptionRedial Tries 2 times Sets the number of redial attempts.Available range: 0 to 9 timesRedial Interval 1 minute Sets the time between redial attempts.Available range: 0 to 5 minutesBlock Junk FaxListSetting OFF Sets Block Junk mode Fax.Registered List Register / Edit (NULL) Register / Edit addresses for Block Junk Faxwhen [Mode2] or [Mode3] is set.Delete Delete addresses for Block Junk Fax when[Mode2] or [Mode3] is set.Ring Response 1 Ring Sets the number of rings required beforereceiving an incoming fax.Dialing Pause Duration 2 seconds Sets the dial pause time.Available range: 0 to 10 secondsRx Reduc. Rate Auto Sets the reception reduction rate.Reduc. Margin 24 mm (0.9inch) or100 mm (3.9inch)Sets the threshold level of receptionreduction.Available range: 0 to 100 mm (0 to3.9 inches)ECM Mode ON Sets whether to use the error correctionmode.
