![Oki MC363 Advanced Manual Manual pdf 58 page image](https://manuals-archive2.s3.amazonaws.com/5401860/f95c520d75edbd0ce5112d4a2cff847458f.jpg)
- 58 -3. Scan1 Press the (SETTING) button on the operator panel.2 Press the button to select [Admin Setup] and press the button.3 Enter the administrator password, and then press the (OK) button.The factory default administrator password is "999999". If the administrator password is changed, enter theupdated password.4 Press the or button to select [Scanner Setup] and press the button.5 Press the button to select [E-mail Setup] and press the button.6 Press the or button to select [From / Reply To] and press the button.7 Press the or button to select [Reply To: ] and press the button.8 Specify a destination.9 Select [Enter], and then press the (OK) button.10 Press the button to go back to the standby screen.1 Press the (SETTING) button on the operator panel.2 Press the button to select [Admin Setup] and press the button.3 Enter the administrator password, and then press the (OK) button.The factory default administrator password is "999999". If the administrator password is changed, enter theupdated password.4 Press the or button to select [Scanner Setup] and press the button.5 Press the button to select [E-mail Setup] and press the button.6 Press the or button to select [From / Reply To] and press the button.7 Press the or button to select [Reply To: ] and press the button.8 Specify a destination.9 Select [Enter], and then press the (OK) button.10 Press the button to go back to the standby screen.Setting the Sender's Address Setting the Reply Address