- 280 -9. Operating Management/ SpecificationsPrivate Print Setup (Except MC363)• Network Setup• Mail Server Setup• LDAP Server Setting• Secure Protocol Server SettingNetwork Setup• Network SettingText Height Same Sets the height of a character.SAME: The height stays the sameregardless of CPI.DIFF: The height varies according toCPI.Item Factory default setting DescriptionVerify job option Disable Set whether to verify a job beforeprinting.If enabled, the machine verifies thatthe job is not altered before startingprinting. The security is enhanced,however it will take longer to startprinting.Erase job option No overwrite Set how to delete a job.You can overwrite deleted data so thatit will not be restored.If enabled, it will take longer to delete.Available value: No overwrite/Zero outonceKeep job for 2 hours Set the storage period of jobs.If the set period elapses after jobs arestored, the jobs will be automaticallydeleted.Available value:15 minutes/30 minutes/1 hour/2 hours/4 hours/8 hours/12 hours/1day/2 days/3 days/4 days/5 days/6days/7 daysJob Limitation Disable Sets whether to save a restricted printjob.If [Private Print Only] is selected, printjobs other than private print are notaccepted.Job Password Authentication OFF Sets whether to verify a job passwordwhen the access control is enabled.Item Factory default setting Description Network MenuItem Factory default setting DescriptionEnabling Default Gateway Wired Sets which default gateway to be enabledbetween wired LAN or wireless LAN.This item is displayed, if wireless LANmodule is fitted.Wired Enable Sets whether to enable wired LAN.TCP/IP Enable Sets whether to enable TCP/IP.NetBIOS Over TCP Enable Sets whether to enable NetBIOS over TCP/IP.This item is displayed when TCP/IP protocolis enabled.IP Address Set Auto Sets the method of assigning an IP address.IPv4 Address 192.168.100.100 Sets an IP address.This item is displayed when TCP/IP protocolis enabled.Subnet Mask 255.255.255.0 Sets a subnet mask.This item is displayed when TCP/IP protocolis enabled.Gateway Address 0.0.0.0 Sets a gateway address.This item is displayed when TCP/IP protocolis enabled.DHCPv6 Disable Selects enable / disable of DHCP when IPv6is used.DNS Server (Primary) 0.0.0.0 Sets the IP address for a Primary DNSserver.This item is displayed when TCP/IP protocolis enabled.DNS Server (Secondary) 0.0.0.0 Sets the IP address for a Secondary DNSserver.This item is displayed when TCP/IP protocolis enabled.
