- 83 -4. Print• Loading Long Paper• For Windows PCL Printer Driver• For Windows PS Printer Driver• For Mac OS XSet a paper size for the MP tray on the operator panel. Then, register a paper size with aprinter driver.Paper sizes of 64 to 216 mm in width and 90 to 1321 mm in length can be registered.• Register the paper size so that the length is longer than the width. You cannot set the length that is shorter than thewidth.• This function may not be available for some applications.• If the paper length exceeds 356 mm, the print quality may not be guaranteed even if the paper is used under therecommended conditions.Loading Long PaperWhen printing on long paper, change the paper type setting, and use the MP tray and rearoutput tray.1 Load paper in the MP tray.2 Open the rear output tray.3 Press the (SETTING) button on the operator panel.4 Press the button to select [Paper Setup] and press the button.5 Press the button to select [MP Tray] and press the button.6 Check that [Paper Size] is selected, and then press the button.7 Press the or button to select [Custom] and press the button.8 Press the button to select [Custom] and press the button.9 Enter the setting value, and then press the (OK) button.10 Press the button until the home screen is displayed.Available long paperLoading Paper (User's Manual)For Windows PCL Printer Driver1 Open the file to print.2 Select [Print] from the [File] menu.3 Click [Preferences].4 Select [User Defined Size] from [Size] on the [Setup] tab.• You can select the paper size from [Banner *** x *** mm] if the paper size is set to 210.0 x 900.0 mm,215.0 x 900.0 mm, or 215.0 x 1200.0 mm.• For instructions on how to set custom size, refer to "Printing on Custom Size Paper".5 Select [Multi Purpose Tray] from [Source].6 Change other settings if necessary, and then click [OK].7 Click [Print] on the [Print] screen.For Windows PS Printer Driver1 Click [Start], and then select [Devices and Printers].2 Right-click the [OKI MC563 PS] icon, and then select [Printing Preferences].3 Click [Advanced] on the [Layout] tab.4 Click [Paper Size], select [PostScript Custom Page Size] from the drop-downlist, and then enter values in [Width] and [Height].5 Click [OK] until the print setting dialog box is closed.Printing on Long Paper
