- 394 -11. Utility Software3 Select the [Device Setting] tab.4 Click [Change password].5 Enter the current password and a new password, and then click [OK].You can register and edit the destination computers of Scan To Computer registered on thismachine as network scan information. This section describes how to export and importnetwork scan information to or from a file.• Exporting Network Scan Settings to a File• Importing Network Scan Settings from a File• Deleting Network Scan SettingsExporting Network Scan Settings to a File1 Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >[Configuration Tool].2 Select the machine that has the network scan settings you want to export from[Registered Device Table].3 Select the [User Setting] tab.4 Click [Network Scan Manager].5 Enter the administrator password, and then click [OK].The factory default password is "999999".6 Click (Export to file).7 Enter the name of a file, select a save destination folder, and then click [Save].After exporting, the edited CSV file may not restore properly.Importing Network Scan Settings from a File1 Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >[Configuration Tool].Setting a Network Scan
