- 285 -9. Operating Management/ Specifications• Reset Settings* 2• Job Log Setup• Print Statistics*1 A message is displayed to confirm the equipment restarts automatically when changes have been made. Select[Yes] to continue. Select [No] to cancel.*2 A message is displayed to confirm the equipment restarts automatically when executed. Select [Yes] to continue.Select [No] to cancel.*3 A message is displayed to confirm that all job logs are deleted when executed. Select [Yes] to continue. Select[No] to cancel.Item Factory default setting DescriptionReset Settings*2 - Deletes job macros, fax transmission /reception data, and the history information,and returns the settings to the default.Item Factory default setting DescriptionClear Job Log*3 - Clears the saved job logs.Item Factory default setting DescriptionMaintenance Counter Disable Sets whether to print the consumablecounter's report.Reset Main Counter - Resets the main counter.Reset Supplies Counter - Reset the consumable counter.This item is displayed when [MaintenanceCounter] is set to [Enable].User InstallItem FactorydefaultsettingDescriptionTime Zone +00:00 Sets the time GMT zone.Available range: -12:00 to +13:00 (15 minutes/ increment)Daylight Saving ON Sets whether to enable the Daylight Savingmode.Time Setup Auto Setup SNTP Server(Primary)Sets the SNTP server to use for setting thecurrent date and time. You can enter up to64 characters.SNTP Server(Secondary)Manual Setup 2001/01/01 0:00 Sets the current date and time manually.Power Setup Auto Power Off Auto Config Sets the behavior of Automatic Power Off.Power Supply Return State Continue Sets a power supply method at the time ofrecovery from the power failure.Select [Manual] if you do not want to make themachine automatically to turn on after therecovery.Office Document Mode(Except MC363)Mode1 This mode allows to always enable the tonersave function.To forcibly enter the machine in toner savemode, select Mode2.High Humid Mode OFF Sets whether to enable the humidity mode.Selecting [Enable] reduces curl generatedwhile printing.(MC363: On/Off only)Quiet Mode(Except MC363)OFF Sets whether to reduce the printing noise.Setting to [ON] affects printing speed.Drum Near Life Timing 1000 Sets the timing for the near life warning for thedrum cartridges.Fuser Near Life Timing 1000 Sets the timing for the near life warning for thefuser unit.Belt Near Life Timing 1000 Sets the timing for the near life warning for thebelt unit.MF (Tone) / DP (Pulse) Tone Select a dial type.TonePulse
