116 Handbook|15 USER LANGUAGE16 INCOMING RING17 REMOTE RECEIVE18 MEM./FEEDER SW.19 NOT USED20 ECM FUNCTION21 REMOTE DIAGNOSIS22 PC/FAX SWITCH23 ONE TOUCH PARAMMessage Confirmation Report (MCF)What is it?This report provides information about your last single-location fax transmission or polling transmission.What information does it provide?• The date of the communication.• The total amount of time spent Sending or Receiving (S,R-TIME).• The Location ID or telephone number of the fax machineyou were communicating with (DISTANT STATION ID).• The communication mode used (Communication Codes).• The number of pages sent or received.• The result of the communication (Results Codes)• Service codes. Be sure to report these diagnostic codes ifyou contact your Authorized Service Dealer aboutcommunication problems.• If the fax was transmitted from memory (not directly fromthe feeder), a portion of the first page prints after thereport. If you do not want this portion of the first page toprint, set User Function 04, Image in MCF, OFF. Refer tothe “Setting Basic Features, User Function Settings”section of this handbook.
