|Handbook 89DeleteRefer to Steps 1 through 6, above.To delete a previously added One Touch location,• Press the One Touch key.• Press No © to delete it from the group.To delete a previously added Auto Dial location,• Press the Auto Dial key.• Enter the 2-digit location Auto Dial number.• Press No © to delete it from the group.7 After you have completed your selection by pressingYes ß or No ©, the display showsSELECT LOC.Continue to add or delete locations from your group.8 When you are finished programming your group, pressthe No © key.The display showsLOCATION PROGRAMMING.9 To program another group, go back to Step 3. If you arefinished, press the Select Function key.Sending to a Group! These instructions assume that you have the defaultsetting for User Function 18 (FEEDER) engaged. If youhave the MEMORY setting engaged, skip step 4.1 Load your document(s).2 Press the Select Function key.3 Press the 2/BROADCAST ↔ FEEEDER TX One Touchkey.The display shows FEEDER TX.4 Press No ©.5 Press the # key, then the two-digit number (01-20) for thegroup.6 Press No © twice.7 Press the Start key.The fax unit scans the document(s) into memory and beginstransmitting the message.
