9.7 PBX Configuration—[1-1]Configuration—Slot—Port Property—Port Type ViewDisplays the number of connected telephones, devices, and Cell Stations (CSs). This screen can be accessedfrom the Port Property screen of any extension cards in use in the PBX system, including extension cards ofExpansion Units. For information about Expansion Units, see 9.33 PBX Configuration—[1-1]Configuration—Slot—Expansion Unit1/Expansion Unit2/Expansion Unit3.This screen can be accessed only in On-line mode.TypeIndicates the types of telephones, devices, or CSs (reference only).Value RangeIP-EXT, SIP-MLT, SIP, DPT (40V) (KX-DT300 series/KX-DT500 series/KX-T7600 series DPTs), DPT (15V)(DPTs other than KX-DT300 series/KX-DT500 series/KX-T7600 series), APT (15V), SLT, DSS Console, UM,VM, Other, CS, High-density CS, IP-CS, SIP-CS, S-PSPC Programming Manual References9.1 PBX Configuration—[1-1] Configuration—SlotTotal CountIndicates the total number of each type of telephone, device, and CS connected to the PBX (reference only).CSs are counted on the basis of the number of ports in service plus the number of extension ports to whichCSs are connected.Value RangeNot applicable.PC Programming Manual References9.1 PBX Configuration—[1-1] Configuration—SlotPC Programming Manual 2399.7 PBX Configuration—[1-1] Configuration—Slot—Port Property—Port Type View
