18.5 PBX Configuration—[10-5] CO & IncomingCall—MiscellaneousThe Intercept Routing feature can activate when the destination of an incoming call is unavailable, or whenthere is no destination for the call, to reroute the call to an alternate destination.Intercept—Intercept Routing - DND (Destination sets DND.)Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.Value RangeDisable (Busy Tone): Sends a busy tone to the caller. (However, a call through an LCOT card will ring at theoriginal destination while the caller hears a ringback tone.)Enable: Redirects the call to the intercept destinationFeature Guide References2.1.1.6 Intercept Routing2.3.3 Do Not Disturb (DND)Intercept—Routing to Operator - No Destination (Destination is notprogrammed.)Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.Value RangeDisable (Reorder Tone): Sends a reorder tone to the caller. (However, a call through an LCOT card will ringat the original destination while the caller hears a ringback tone.)Enable: Redirects the call to an operatorFeature Guide References2.1.1.7 Intercept Routing—No DestinationIntercept—Intercept Routing for Extension CallEnables the Intercept Routing feature to operate for extension calls.Value RangeDisable, EnableFeature Guide References2.1.1.7 Intercept Routing—No Destination726 PC Programming Manual18.5 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous