14.6 PBX Configuration—[6-6] Feature—TenantA maximum of 8 tenants can share the PBX. Each tenant is composed of specified extension user groups.The PBX offers each tenant its own Time Table and system resources.To assign extensions as operators easily, click Extension No. Setting (see 2.1.6 Extension NumberSetting).Music On HoldSpecifies the audio source to be used for Music on Hold.Value RangeSame as System Setting, BGM1, BGM2, BGM3, BGM4, BGM5, BGM6, BGM7, BGM8, TonePC Programming Manual References10.2 PBX Configuration—[2-2] System—Operator & BGMFeature Guide References2.13.4 Music on Hold5.1.3 Tenant ServiceOperator (Extension Number)Specifies the extension number or the floating extension number of an incoming call distribution group to bedesignated as the tenant operator. When this parameter is left unspecified, the PBX operator serves as thetenant operator.Value RangeMax. 5 digits (consisting of 0–9)PC Programming Manual References10.2 PBX Configuration—[2-2] System—Operator & BGMFeature Guide References5.1.3 Tenant Service5.1.5 Operator FeaturesARS ModeSpecifies the ARS mode used when making a trunk call.Value RangeOff: ARS is disabled.On for Local Access Operation: ARS operates when an extension user makes a call using any Idle Line Accessmethod.On for Any CO Access Operation: ARS operates when an extension user makes a call using any Trunk Accessmethod.PC Programming Manual 67714.6 PBX Configuration—[6-6] Feature—Tenant