11.11 PBX Configuration—[3-11] Group—VM(DPT)Group11.11.1 PBX Configuration—[3-11-1] Group—VM(DPT)Group—System SettingsA Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports of the PBX.The DPT ports that are connected to the VPS are called a VM (DPT) Group. 2 VM (DPT) Groups can beprogrammed.Call Waiting on VM GroupEnables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone isnot sent to any VM port.)Value RangeDisable, EnablePC Programming Manual References9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension TypeFeature Guide References2.2.2.4 Queuing Feature2.28.1 Voice Mail (VM) GroupIntercept to Mailbox for Call to ExtensionEnables the PBX to send the mailbox number of the called extension to the VPS when a call is redirected tothe VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number, the VPS answers thecall with the appropriate mailbox.Value RangeDisable, EnablePC Programming Manual References9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—InterceptDestination— Intercept Destination—When called party does not answer—Day, Lunch, Break, Night12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—InterceptDestination— Intercept Destination—When called party does not answer—Day, Lunch, Break, NightFeature Guide References2.28.1 Voice Mail (VM) GroupPC Programming Manual 54511.11.1 PBX Configuration—[3-11-1] Group—VM(DPT) Group—System Settings