Fax No Answer Time (5-60s)Specifies the length of time (in seconds) that the system waits for the main or alternate fax extension to answera fax call before taking other action, such as notifying the Fax Manager that the fax could not be received.Value Range5–60 sFax Manager Mailbox No.Specifies the mailbox number of the Fax Manager. The system will notify the Fax Manager of the status of faxcalls depending upon the settings of the Fax No Answer Coverage Mode and Fax Notification Modeparameters.Value Range2–[the value set in Mailbox No. Max. Length (3-8)] digitsFax No Answer Coverage ModeDetermines what action the system takes when an incoming fax call could not be answered by the main oralternate fax extension. The system can announce to the Fax Manager the number of unanswered fax calls.The number announced is the number of unanswered fax calls since the last time the system notified the FaxManager. This announcement is heard when the Fax Manager logs in to his or her mailbox.Value RangeNo: The system will not notify the Fax Manager when fax calls were not answered.Mbx: The system will announce the number of unanswered fax calls to the Fax Manager when the Fax Managerlogs in to his or her mailbox.Ext: The system will announce the number of unanswered fax calls to the Fax Manager by calling the FaxManager’s extension.Fax Notification ModeDetermines what action the system takes when an incoming fax call is successfully received by the main oralternate fax extension. The system can announce to the Fax Manager the number of received fax calls. Thenumber announced is the number of received fax calls since the last time the system notified the Fax Manager.Value RangeNo: The system will not notify the Fax Manager when fax calls are answered.Mbx: The system will announce the number of successfully received fax calls to the Fax Manager when theFax Manager logs in to his or her mailbox.Ext: The system will announce the number of successfully received fax calls to the Fax Manager by callingthe Fax Manager’s extension.Disconnect ParametersMaximum Silence Time (0-60 s)Specifies the length of silence detected by the system before the system disconnects the call.Value Range0–60 s838 PC Programming Manual24.4 UM Configuration—[5-4] System Parameters—Parameters
