5.1.1 System Control—Program Update—Download Program FileSoftware updates for PBX hardware components can be downloaded to the PBX. Manual and automaticmethods are available.Programme downloading can be performed only in On-line mode.Note• When using an FTP server with this feature, the programme files to be downloaded to the PBX mustbe named on the FTP server in a specific way that includes the version number.Example: "PNT300_xxx_xxx_xxx"("xxx_xxx_xxx" is the version number.)ManualUsing manual operations, the location of updated PBX software is specified and downloaded to the Main unit.To download programme files manually1. In Location of program files, specify the location of the updated files from the Look in drop-down list.The choices are as follows:• Local PCClick Browse and specify the location of the updated programme files stored on the PC logged in toWeb Maintenance Console.• USB MemoryIf a USB memory device is inserted into the PBX, the contents of the following directory on the devicewill be checked for updated files:/private/meigroup/psn/ippbx/update• FTP ServerThe PBX connects to the specified FTP server and checks for updated files. Specify an FTP serverfrom the FTP connection name drop-down list, and specify the number of attempts to connect to theFTP server in No. of retries.To specify a new FTP site, see 27.3.1 Network Service—[3-1] Client Feature—FTP.• NASSpecify the location of the updated programme files stored on a directory of the NAS to WebMaintenance Console.2. Specify which PBX programme files will be automatically downloaded by checking the boxes next to eachhardware item.3. For FTP Server onlyClick Check to confirm the connection to the FTP server. If a connection is established, the Execute buttonwill become active.4. Click Execute, and then click OK on the confirmation message that appears. When the transfer is complete,click OK.Note• If downloading cannot be completed within 10 minutes (due to slow network speeds or other connectionproblems), the download operation will be cancelled.AutomaticThe Main unit is set to automatically check an FTP server for updated programme files. If an update is available,the Main unit will download the data.To download programme files automatically1. For Download Server, select an FTP site.To specify a new FTP site, see 27.3.1 Network Service—[3-1] Client Feature—FTP.2. For Download mode, select one of the following:• None: No actions are taken (automatic downloading is disabled).66 PC Programming Manual5.1.1 System Control—Program Update—Download Program File
