3–Interactive CommandsUtilities Menu3-74 SN0054614-00 K;; FW Area data file for standard card;**************************************************************************; !!!!! DO NOT CHANGE THE ORDER OF THE DATA !!!!!!!!!!!!;**************************************************************************;;***************************************************; FW Area header (BYTE OFFSET 0000h - 0013h);***************************************************FW Signature [0-FFFFFFFFh] = caba3821...Firmware Area Save(Command Line Option -u)10: Utilities n: Firmware Area SaveThe Firmware Area Save operation reads the contents of the firmware preloadtable in the adapter Flash and exports the data to a specified DAT file.This option is visible only if you have selected an 8Gb adapter.To save the firmware area:1. On the Utilities menu, select the number for the Firmware Area Saveoption.The following menu is shown, for example:Firmware Area Save MenuHBA Model QLE25621: Port 1: WWPN: 21-00-00-1B-32-16-18-EE Loop Down2: Port 2: WWPN: 21-01-00-1B-32-36-18-EE OnlineHBA Model QLE8000Port 1: WWPN: 21-00-00-1B-32-0A-A9-B4 Link DownFCoE EnginePort 2: WWPN: 21-01-00-1B-32-2A-A9-B4 Link DownHBA Model QLE220Port 1: WWPN: 21-00-00-E0-8B-91-A4-26 Loop DownHBA Model QLE2462Port 1: WWPN: 21-00-00-1B-32-00-27-CE OnlinePort 2: WWPN: 21-01-00-1B-32-20-27-CE Loop Down3: Return to Previous Menu2. Select the number corresponding to the QLE256x adapter port for which youwant to save the firmware area.3. At the prompt, enter the name of an existing firmware preload table DAT file.
