4–Non-Interactive CommandsCommand Summary4-6 SN0054614-00 KYou cannot combine the command -f with any other options: -f = Input Parameter Options from a Text File (see “-f (Input ParameterOptions from a Text File)” on page 4-13). For example:# scli -f command.txtIn addition, the following general rules for commands apply: Only one command line option per input file is valid. You can use either the hyphen (-) character or the forward slash (/)character. For example, both of these commands are valid:scli -gscli /gTable 4-2 defines the command variables..-a(View or Toggle Beacon Status)Use the -a command to either view (1) or change (2) the status of a beacon.Table 4-2. Command VariablesVariable Definition Format<hba instance> Adapter numberaa You can use the -g command to find adapter numbers.<hba wwpn> Adapter world wide portnamexx-xx-xx-xx-xx-xx-xx-xx orxxxxxxxxxxxxxx<alias> Adapter alias Symbolic adapter b nameb You assign the symbolic name. It is limited to 100 characters in length.<target wwnn> Target world wide nodenamexx-xx-xx-xx-xx-xx-xx-xx orxxxxxxxxxxxxxx<target wwpn> Target world wide portnamexx-xx-xx-xx-xx-xx-xx-xx orxxxxxxxxxxxxxx<target port id> Target port ID xx-xx-xx or xxxxxx<target id> Target ID<lun id> Logical unit number (0–255)<address> IP address xxx.xxx.xxx.xxx(speed) Target link speed 1.2 or 4 GHz, or 8GTable Notes
