4–Non-Interactive CommandsCommand Summary4-42 SN0054614-00 K-q(View or Set Target Link Speed)Type the following command to view the link speed of all targets attached to oneadapter or all adapters:# scli -q (<hba instance> | <hba wwpn> | <all>) [-targets | -t ]Where:To view the link speed of a specific target attached to an adapter, enter thefollowing command:# scli -q (<hba instance> | <hba wwpn> | <target wwpn>Where:To set the link speed of all targets attached to one adapter or all adapters to thedesignated speed, enter the following command:# scli -q (<hba instance> | <hba wwpn> | <all>) <-targets | -t><speed>Where:NOTE:The -q option is supported only on 4GB adapters.hba instance = Adapter number (use -g command to find)hba wwpn = World wide port name of the adapterall = Reports link speed for all targets on all adapters in the system-targets = All targets-t = All targetshba instance = Adapter number (use -g command to find)hba wwpn = World wide port name of the adaptertarget wwpn = World wide port name of the targethba instance = Adapter number (use -g command to find)hba wwpn = World wide port name of the adapterall = Reports link speed for all targets on all adapters in the system-targets = All targets-t = All targetsspeed = Link speed (
