1–Installation and RemovalInstalling SANsurfer FC/CNA HBA CLISN0054614-00 K 1-152. Decompress the file with the following command:gunzip <file name>3. Enter the following command to install the package:rpm -iv scli-x.xx.xx-xx.i386.rpmThe new package is installed in the following directory:/opt/QLogic_Corporation/SANsurferCLITo query for the installed SANsurfer FC/CNA HBA CLI package name, enter thefollowing text from the command line:rpm -q scliSolaris InstallationTo install SANsurfer FC/CNA HBA CLI on Solaris, follow the steps in one of thesesections: “Solaris SPARC 8, 9, 10 Installation” on page 1-15 “Solaris x86 9 and 10 Installation” on page 1-17Solaris SPARC 8, 9, 10 InstallationFollow these steps to install SANsurfer FC/CNA HBA CLI on a Solaris SPARC 8,9, or 10 operating system.To install SANsurfer FC/CNA HBA CLI on Solaris 8, 9, or 10:1. From the QLogic Web site or the SANsurfer for FC and FCoE AdaptersCD-ROM, download to a temporary directory (for example, /tmp) on yourmachine the following file:scli-x.xx.xx-xx.sparc.Solaris.pkgNOTE:For SUSE SLES IA64, the command line is:rpm --iv scli-x.xx.xx-xx.ia64.rpm --nodepsNOTE:In the file name, x.xx.xx-xx stands for the current version ofSANsurfer FC/CNA HBA CLI. The -xx stands for the build version.
