3–Interactive CommandsDiagnostics Menu (Command Line Options -kl, -kr, and -dm)3-80 SN0054614-00 KData Size (Bytes) : 512Number of test(s)(1-65535) : 65535Test Increment(1-65535) : 1On Error : IgnoreTest Continuous : OFFLoopback Type : External Loopback------------------------------------------------------------------------------Reset Test Parameters (Loopback)12: Diagnostics n: Port Number 1: Loopback Test2: Reset Test ParametersSelect this option to reset the current loopback test parameters to the defaults.The default settings are restored immediately.Restoring default settings ..., done.Configure Test Parameters (Loopback)12: Diagnostics n: Port Number 1: Loopback Test3: Configure Test ParametersSelect the Configure Test Parameters option to set the parameters for theloopback test. For example:Diagnostic Menu (Loopback)HBA Instance 2 (QLE2562 Port 1) : OnlineWWPN: 21-00-00-1B-32-1B-4E-4CDesc: QLE2562 PCI Express to 8Gb FC Dual Channel1: Data Pattern2: Data Size3: Number of Test(s)4: Test Increment(s)5: On Error Policy6: Enable/Disable Test Continuously7: Loopback Type (displayed for 8Gb adapters only)8: Return to Previous MenuTable 3-10 shows the diagnostics configuration settings.
